Board logo

標題: USB傳送速度變慢的原因 [打印本頁]

作者: lipgel    時間: 2009-7-21 09:45 PM     標題: USB傳送速度變慢的原因

想請問USB傳送速度變慢的原因?
插flash drive,ext hdd,相機,過野都好慢..&有呢個msg彈出黎"如果你將這個USB裝置連線到高速USB2.0連接埠...etc"
以前都冇呢個問題
用緊xp sp2,底板/機箱前置usb個個位都試哂都係咁,
試過用usb分插都係..help & thanks
作者: Low_B    時間: 2009-7-21 11:27 PM

Sorry to answer this in English. I am at work now and all our computers can't type Chinese.

You can try to transfer some file to your flash drive,
If the transfer rate is around 880-1200 KB/s
that would put it around usb 1.1 speeds

a few ideas below:
1. do you have the right drivers installed for your usb ports
2. do you have more than than 2 usb ports, my pc has 2x 1.1 and 2x 2.0 ports
3. do you have any other usb 2.0 devices that work at top speed.
4. are you sure you have usb 2.0 ports **(I think this one maybe the problem)**
5. maybe you have a driver conflict, have you tried reinstalling the drivers.

I will try to put this in to Chinese later when I get home from work.
Hope this can help you
作者: lipgel    時間: 2009-7-22 12:23 AM

thanks :)
1. yep i guess so
2. i hv 4 on board usb ports and 2 前置
3. all 2.0 devices insert, 呢個msg彈出黎"如果你將這個USB裝置連線到高速USB2.0連接埠...etc"
4. of cus 2.0
5. how can i reinstall the drivers? u mean usb driver, right?
作者: cck_my    時間: 2009-7-22 01:13 AM

先install chipset drivers:

如果是intel chipset的主板可以下载以下档案安装:

http://fileforum.betanews.com/se ... S_9.1.1.1015_PV.exe
作者: lipgel    時間: 2009-7-22 01:28 AM

已成功安裝 重啟了
但問題仍在
anyway, thanks
作者: cck_my    時間: 2009-7-22 09:36 AM

已成功安裝 重啟了
但問題仍在
anyway, thanks
lipgel 發表於 2009-7-22 01:28 AM
这是官方版本:

http://downloadmirror.intel.com/16023/a08/infinst_autol.exe

你知道你主板(motherboard)的品牌和型号吗?
作者: lipgel    時間: 2009-7-24 01:42 AM

Asus P5LD2
作者: cck_my    時間: 2009-7-24 10:27 AM

Asus P5LD2
lipgel 發表於 2009-7-24 01:42 AM
官方下载网:
http://support.asus.com/download/download.aspx?modelname=P5LD2&SLanguage=en-us

先下载chipset的安装,看如何
作者: anthony0908    時間: 2009-7-25 10:19 AM

YOU MAY TRY TO UPDATE YOUR OS TO SP3, THEN UPDATE YOUR BIOS
作者: wa709394    時間: 2009-8-17 10:44 AM

會唔會系你個讀卡器唔系高速2.0芯片啊?
可以的話換過個讀卡器試試啦!
作者: snoopy200606    時間: 2009-8-19 04:03 PM

BIOS in MB set to hi-speed / enable USB 2.0 or not ?
作者: ivan04    時間: 2009-9-28 09:00 PM

usb果個裝可能已經有問題置




歡迎光臨 公仔箱論壇 (http://www3.tvboxnow.com/) Powered by Discuz! 7.0.0