Board logo

標題: [輕度改裝] 有关turbo的问题 [打印本頁]

作者: bird1314    時間: 2010-4-11 02:40 PM     標題: 有关turbo的问题

我的车装了turbo,可是它的放屁声很小声...不懂有什么问题..谁能帮帮我?谢谢
作者: kerith    時間: 2010-4-17 05:28 AM

系咪你个涡轮太细?你装既几多号?
作者: chrissyong    時間: 2010-9-7 01:41 AM

your car got blow off valve or not?or your car boost too low,like 0.3 or 0.4 bar,sure not blow off sound,u try up boost like 0.7bar or 1bar,sure got sound,but must tune your ecu for safe air fuel ratio like 10.1 if your engine internal still stock
作者: huit    時間: 2010-9-12 01:54 AM

Or if you don't want to do something drastic like messing with the boost pressure (most people dial up the boost pressure to go faster and not to make noise), and all you want to achieve is louder noise, get a riceboy style BOV with a trumpet attached to the nozzle to amplify the sound (Blitz makes some good ones), or relocate the BOV closer to the turbo so there's less pressure drop, or relocate it closer to the outside of the engine bay so the sound deadening material under the bonnet won't muffle the noise (eg near the intercooler)

While a higher boost pressure will definitely result in louder noise as the BOV discharges - you cannot say categorically 0.3-0.4 bar would produce inaudible blow-off noise - there are too many factors involved.

But first of all, you need to establish whether you car has a BOV at all - most cars come from the factory with a bypass valve that vents the charged air back to the intake, because in most jurisdictions BOVs are illegal.
作者: atomu28    時間: 2011-8-22 07:32 AM

great explanation
作者: MRS-CHEN    時間: 2012-2-26 11:45 AM

放气声
作者: MRS-CHEN    時間: 2012-2-26 11:45 AM

放气声有好多原因
PSI高同低..出既声又唔一样
发动机既排量大小..出生都唔一样
作者: MRS-CHEN    時間: 2012-2-26 11:46 AM

选择放气阀都系一个原因
作者: altezzack    時間: 2012-3-22 06:32 PM

0.3 or 0.4 bar,not blow off sound? are you sure?




歡迎光臨 公仔箱論壇 (http://www3.tvboxnow.com/) Powered by Discuz! 7.0.0