返回列表 回復 發帖

[Mac] Mac.OS.X.Snow.Leopard.10.6.0.Patched.for.PC

( Mac.OS.X.Snow.Leopard.10.6.0.Patched.for.PC ) 怎样 install to pc 电脑 ? ?
•Dual boot with Vista/7 (Can't dual boot with XP or older.  Google instructions for linux.   
                                                                 
→With installing mac first:                                                   
  »Boot up to the installer (or to your mac if you have another version installed) and open Disk Utility under Utilities.                                   
  »Create a new partition if you plan on installing it on the same drive, and  format it to HFS+ (Mac OS X Extended (Journaled)). (Also do with full drive  if you plan on installing OS X only on the drive)                           
   »Then if you need to apply the DSDT patch in the installation (you will see as you go)                                                                  
   »Install OS X.  MAKE SURE YOU CHOOSE CUSTOMIZE BEFORE THE INSTALL!            
   »If you installed the bootloader that is by defualt chosen during the install then you do not need to do the dual boot steps of Windows.                  
   »Now after you have it installed and everything, boot into Windows, and  install as normal. (If you cant boot into your mac, then use Windows Disk-part to set your mad partition or drive as active.                           


  →With Windows installed first:                                                
   »Create a partition in Windows at least 8GB in size and set it to active      
   »Use USBit to make your USB the installer.                                    
   »Boot into your USB and open disk utility.  Format your mac partition to HFS+
   »Apply the DSDT patch if neccessary.                                          
   »Go through the install REMEMBERING TO CUSTOMIZE YOUR INSTALLATION.           
   »After installed, and have your OSx86 setup, open disk utulity again and set  the Windows partition to active (If you Don't want to use the Mac bootloader which i suggest you use)                                                     
   »After booting into Windows, download and install EasyBCD (Google is your friend) and add a new entry.                                                
   »Choose 'Generic x86 PC' for the mac and DONT CHANGE THE NAME                 
   »Then save changes.  Now when you boot up, it will let you choose which to boot into.           
                                                        
  →If you don't understand anything, google it Or go to OSx86.com.   
   THEY ALSO HAVE A FULL LIST OF COMPLETELY COMPATIBLE HARDWARE!                 
  •If you cant boot because you have a x32 PC, then use the bootflags   -v -x32                                                                     
   If you load a few kernals then your screen flashes white and goes black use   voodoo -v -x32            

More info:
http://wiki.osx86project.org/wiki/index.php/Main_Page

thanks " cck_my "

大风歌

提示: 作者被禁止或刪除 內容自動屏蔽
Make sure your Hardware is fully compatible with patched Mac OSX, else it won't work.
thanks for sharing
thx for sharing
for sharing
1

評分次數

  • cck_my

1# ser
感謝大大的無私~~
THANKS!
多了一個遊戲玩~~
返回列表